Check valves for the control of air.
Allows full flow in one direction.

Showing all 11 resultsSorted by latest

Show sidebar
Show 12 24 36

Ball Check Valve – Stainless Steel

400 psi maximum size 1/4” to 1/2” 210° F maximum temperature 0.5 psi cracking pressure Model Size SC-2 1/4” SC-3

Ball Check Valve – Brass

400 psi maximum size ¼” to 2” 210° F maximum temperature 0.5 psi cracking pressure Model Size BC-2 1/4” BC-3

Check Valve – Female – Female 2000 psi maximum

2000 psi maximum -20° F to 212° F Brass Model Size BC 125B 1/8” BC 250B 1/4”

Check Valve – Male-Male (Control Devices)

250 psi maximum 40° F to 250° F Brass Model Size M2525 1/4”

Check Valve – Female – Female

212 psi maximum 40° F to 140° F Nickel Plated Brass Cracking pressure 5 psi Model Size CV-1 1/8” CV-2

Swing Check Valve

Bronze Construction Operating Temp. 200° F Max. Pressure 150 psi Full flow and can be installed vertically or horizontally Recommended

Inline Check Valve (Control Devices)

IC valve can be installed in the discharge line of the compressor whenever an in-tank valve will not fit, and

Cast Brass Check Valve (Control Devices)

250 psi maximum 450° F maximum temperature Cracking Pressure < 3 psi Model Size CB-13 1/8” CB-25 1/4” CB-38 3/8”

Intank Check Valve – Compression Fitting (Control Devices)

Model Material SCFM Tube Comp MPT outlet C5050-ST Brass 20 1/2” 1/2” SC1212 Steel 20 1/2” 1/2” C7575-ST Brass 30

Intank Check Valve – NPT Threads (Control Devices)

Model Material SCFM FPT inlet MPT outlet P5050-ST Brass 20 1/2” 1/2” S1212 Steel 20 1/2” 1/2” P5075-ST Brass 30

Load Genie – Unloader Check Valve (Control Devices)

Combination Unloader and Check Valve. Unloads compressor manifold any time flow stops. Model Inlet Outlet SCFM PA-12 3/8” FPT 3/8”