Click to enlarge
Intank Check Valve - Compression Fitting (Control Devices)
Back to products
Inline Check Valve (Control Devices)

Cast Brass Check Valve (Control Devices)

Please see below for product description and specs.
Categories: , Tag:
Description
  • 250 psi maximum
  • 450° F maximum temperature
  • Cracking Pressure < 3 psi
Model Size
CB-13 1/8”
CB-25 1/4”
CB-38 3/8”
CB-50 1/2”
CB-75 3/4”
CB-10 1”
CB-12 1 1/4”
CB-15 1 1/2”
CB-20 2”
Additional information
Model

CB-13, CB-25, CB-38, CB-50, CB-75, CB-10, CB-12, CB-15, CB-20
Manufacturer

Control Devices

Related products

Tank Manifolds (Control Devices)

Model Application ACM Air Compressor CTM Carry Tank
Electronic Drain

Control Devices Timer Drain 1/2” NPT Inlet 3/8″ NPT Outlet (JH53-0KWAA)

Inlet: 1/2” FIP Outlet: 3/8″ FIP Voltage: 115v Capacity: 2.72 GPM @100 PSI Maximum Pressure: 250 PSI Maximum Fluid Temperature:

Ball Check Valve – Brass

400 psi maximum size ¼” to 2” 210° F maximum temperature 0.5 psi cracking pressure Model Size BC-2 1/4” BC-3

Check Valve – Female – Female

212 psi maximum 40° F to 140° F Nickel Plated Brass Model Size CV-1 1/8” CV-2 1/4” CV-3 3/8” CV-4

Non Code Relief Valve (Control Devices)

This safety valve though miniature in size has been designed to give high flow performance. NC valves incorporate many of

Load Genie – Unloader Check Valve (Control Devices)

Combination Unloader and Check Valve. Unloads compressor manifold any time flow stops. Model Inlet Outlet SCFM CA-12 1/2” tube conn.

Tank Valve (Control Devices)

Tank valves are used wherever a method of inflating a tank with a standard air chuck is required. Brass body,

Low Pressure Relief Valve (PR-25) (Control Devices)

Model PR low pressure relief valves are used in systems to maintain a desired pressure level. Model PR is a