Manufacturer of valves and controls for industrial air products. ASME-code/CRN stamped safety valves, check valves, pilot valves, unloader valves, throttle controls, and electronic drain valves (shipping from Canada).

Show sidebar
Show 12 24 36

1/4” – 3/8” ASME Safety Relief Valves (Control Devices)

A compact, high flow rate safety valve. All brass construction with resilient silicone seat seal results in a bubble tight

1/2” ASME Safety Relief Valves (SF-50) (Control Devices)

High flow rate safety valve. All brass construction with resilient silicone rubber seat seal results in a bubble tight seal

1” – 1 ¼” ASME Safety Relief Valves (Control Devices)

High flow rate safety valve. Brass construction Resilient Silicone rubber seat Bubble tight to within 10% of set pressure. Maximum

High Capacity ASME Side Port Relief Valves (Control Devices)

Side vent ASME safety valve designed for large flow capacities Pull Ring design O Ring seal is bubble tight to

Non Code Relief Valve (Control Devices)

This non-code safety valve is field adjustable, with a knurled thumbscrew that make adjustments easy and repeatable. They can be

Low Pressure Relief Valve (PR-25) (Control Devices)

Model PR low pressure relief valves are used in systems to maintain a desired pressure level. Model PR is a

Vacuum Relief Valve (Control Devices)

Model VR vacuum relief valves are used in systems to maintain a desired vacuum level. Model VR is a proportional

Cold Start Valve (Control Devices)

CS -12 and CS -25 valves bleed air from the compressor head during the first few revolutions, thus reducing motor

Load Genie – Unloader Check Valve (Control Devices)

Combination Unloader and Check Valve. Unloads compressor manifold any time flow stops. Model Inlet Outlet SCFM CA-12 1/2” tube conn.

Intank Check Valve – NPT Threads (Control Devices)

Model Material SCFM FPT inlet MPT outlet P5050-ST Brass 20 1/2” 1/2” S1212 Steel 20 1/2” 1/2” P5075-ST Brass 30

Intank Check Valve – Compression Fitting (Control Devices)

Model Material SCFM Tube Comp MPT outlet C5050-ST Brass 20 1/2” 1/2” SC1212 Steel 20 1/2” 1/2” C7575-ST Brass 30

Cast Brass Check Valve (Control Devices)

250 psi maximum 450° F maximum temperature Cracking Pressure < 3 psi Model Size CB-13 1/8” CB-25 1/4” CB-38 3/8”