Click to enlarge
1/4” - 3/8” ASME Safety Relief Valves (Control Devices)
Back to products
1” - 1 ¼” ASME Safety Relief Valves (Control Devices)

1/2” ASME Safety Relief Valves (SF-50) (Control Devices)

Please see below for product description and specs.
Categories: , Tags: , , , , , , , , , , ,
Description

High flow rate safety valve.

  • All brass construction with resilient silicone rubber seat seal results in a bubble tight seal to within 10% of set pressure.
  • Zinc-plated music wire spring.
  • Maximum temperature 250° F
Model Size Set Pressure (Range PSIG)
SF-50 1/2” 50 to 250 psi
Additional information
PSI

50, 75, 80, 90, 100, 110, 115, 120, 125, 135, 140, 150, 155, 160, 165, 175, 190, 200, 215, 220, 225, 230, 245, 250
Manufacturer

Control Devices

Related products

Cast Brass Check Valve (Control Devices)

250 psi maximum 450° F maximum temperature Cracking Pressure < 3 psi Model Size CB-13 1/8” CB-25 1/4” CB-38 3/8”

Low Pressure Relief Valve (PR-25) (Control Devices)

Model PR low pressure relief valves are used in systems to maintain a desired pressure level. Model PR is a

1” – 1 ¼” ASME Safety Relief Valves (Control Devices)

High flow rate safety valve. Brass construction Resilient Silicone rubber seat Bubble tight to within 10% of set pressure. Maximum

1/4” – 3/8” ASME Safety Relief Valves (Control Devices)

A compact, high flow rate safety valve. All brass construction with resilient silicone seat seal results in a bubble tight

P25 Unloader Pilot Valve (Control Devices)

Variable Range and Differential This Unloader Pilot Valve fills the need for a control that can be adjusted both for

Intank Check Valve – NPT Threads (Control Devices)

Model Material SCFM FPT inlet MPT outlet P5050-ST Brass 20 1/2” 1/2” S1212 Steel 20 1/2” 1/2” P5075-ST Brass 30

LGM 30 Load Genie – Continuous Run Unloader (Control Devices)

The Load Genie Mark LGM 30 replaces the conventional three component system with all the economic advantages including elimination of
Electronic Drain

Control Devices Timer Drain 1/2” NPT Inlet 3/8″ NPT Outlet (JH53-0KWAA)

Inlet: 1/2” FIP Outlet: 3/8″ FIP Voltage: 115v Capacity: 2.72 GPM @100 PSI Maximum Pressure: 250 PSI Maximum Fluid Temperature: