Check Valve - Female - Female - Image 1
Click to enlarge
Swing Check Valve
Swing Check Valve
Back to products
Check Valve - Male-Male (Control Devices)
Check Valve - Male-Male (Control Devices)

Check Valve – Female – Female

Please see below for product description and specs.
Category:
Description
  • 212 psi maximum
  • 40° F to 140° F
  • Nickel Plated Brass
  • Cracking pressure 5 psi
Model Size
CV-1 1/8”
CV-2 1/4”
CV-3 3/8”
CV-4 1/2”
Additional information
Model

CV-1

,

CV-2

,

CV-3

,

CV-4

Related products

Ball Check Valve – Stainless Steel

400 psi maximum size ¼” to 2” 175 psi maximum 2 ½” to 3” 210° F maximum temperature 0.5 psi

Cast Brass Check Valve (Control Devices)

250 psi maximum 450° F maximum temperature Cracking Pressure < 3 psi Model Size CB-13 1/8” CB-25 1/4” CB-38 3/8”

Check Valve – Female – Female 2000 psi maximum

2000 psi maximum -20° F to 212° F Brass Model Size BC 125B 1/8” BC 250B 1/4”

Inline Check Valve (Control Devices)

IC valve can be installed in the discharge line of the compressor whenever an in-tank valve will not fit, and

Intank Check Valve – Compression Fitting (Control Devices)

Model Material SCFM Tube Comp MPT outlet C5050-ST Brass 20 1/2” 1/2” SC1212 Steel 20 1/2” 1/2” C7575-ST Brass 30

Intank Check Valve – NPT Threads (Control Devices)

Model Material SCFM FPT inlet MPT outlet P5050-ST Brass 20 1/2” 1/2” S1212 Steel 20 1/2” 1/2” P5075-ST Brass 30

Swing Check Valve

Bronze Construction Operating Temp. 200° F Max. Pressure 150 psi Full flow and can be installed vertically or horizontally Recommended

Load Genie – Unloader Check Valve (Control Devices)

Combination Unloader and Check Valve. Unloads compressor manifold any time flow stops. Model Inlet Outlet SCFM PA-12 3/8” FPT 3/8”