Load Genie - Unloader Check Valve (Control Devices) - Image 1
Click to enlarge
Cold Start Valve (Control Devices)
Cold Start Valve (Control Devices)
Back to products
Intank Check Valve - NPT Threads (Control Devices)
Intank Check Valve - NPT Threads (Control Devices)

Load Genie – Unloader Check Valve (Control Devices)

Please see below for product description and specs.
Categories: , , Tags: ,
Description

Combination Unloader and Check Valve. Unloads compressor manifold any time flow stops.

Model Inlet Outlet SCFM
PA-12 3/8” FPT 3/8” MPT 3 to12
Additional information
ModelCA-6, CA-12, CA-24, PA-6, PA-12, PA-24, PA-48
ManufacturerControl Devices

Related products

1 Piece Stainless Steel Ball Valve with Locking Handle

Investment Cast Reduce Bore 800 psi Body – CF8M Ball/Stem 316 SS Seats PTFE Model Size SS1FF-2 1/4” SS1FF-3 3/8”

Carbon Steel Ball Valves

2000 psi 150 psi saturated steam Chrome plated ball Blow-out proof stem c/w adj. packing RTFE seats & seals Temp.

Cast Brass Check Valve (Control Devices)

250 psi maximum 450° F maximum temperature Cracking Pressure < 3 psi Model Size CB-13 1/8” CB-25 1/4” CB-38 3/8”

Check Valve – Male-Male (Control Devices)

250 psi maximum 40° F to 250° F Brass Model Size M2525 1/4”

LGM 30 Load Genie – Continuous Run Unloader (Control Devices)

The Load Genie Mark LGM 30 replaces the conventional three component system with all the economic advantages including elimination of

Inline Check Valve (Control Devices)

IC valve can be installed in the discharge line of the compressor whenever an in-tank valve will not fit, and

Intank Check Valve – NPT Threads (Control Devices)

Model Material SCFM FPT inlet MPT outlet P5050-ST Brass 20 1/2” 1/2” S1212 Steel 20 1/2” 1/2” P5075-ST Brass 30

Miniature Brass Ball Valves – Male/Female

450 psi Chrome plated brass body Temp – 4°F to 200°F Model Size 335-1 1/8” 335-2 1/4” 335-3 3/8” 335-4